|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
DS HIGHLY SENSITIVE 1500 V FCC SURGE WITHSTANDING MINIATURE RELAY 35.24 1.387 9.9 .390 9.8 .386 20 .787 9.9 .390 9.8 .386 DS-RELAYS UL File No.: E43149 CSA File No.: LR26550 * High sensitivity: 200 mW pick-up power 100 mW pick-up power types available * Latching types available * High switching capacity: 60 W, 125 V A * High breakdown voltage: 1,500 V FCC surge between open contacts 1,000 V AC between open contacts * DIP-1C type can be used with 14 pin IC socket 2C type can be used with 16 pin IC socket, 4C type can be used with 2 sets of 14 pin IC sockets * Gold-cap silver palladium types available for 2 Form C type * Bifurcated contacts are standard Characteristics (at 25C 77F, 50% Relative humidity) 1 Form C, 2 Form C, 4 Form C 50 m Max. operating speed Initial insulation resistance*1 Type of relay Initial Between open contacts breakdown Between contacts sets voltage*2 Between contacts and coil FCC surge voltage between contacts and coil Operate time*3 (at nominal voltage) Release time (without diode)*3 (at nominal voltage) Set time*3 (at nominal voltage) Reset time*3 (at nominal voltage) Temperature rise (at nominal voltage, Contact current: 2A) Shock resistance Functional*4 Destructive*5 Functional*6 Vibration resistance Destructive Conditions for operation, transport and storage *7 (Not freezing and condensing at low temperature) www..com 15 .590 9.9 .390 9.8 .386 DS4E DS2E DS1E mm inch SPECIFICATIONS Contact Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1 A) Contact material Max. switching power Max. switching voltage Rating (resistive) Max. switching current Max. carrying current UL/CSA rating Gold-clad sliver 60 W, 125 VA 220 V DC, 250 V AC 2 A DC, AC 3 A DC, AC 0.6 A 125 V AC 0.6 A 110 V DC 2 A 30 V DC Expected Mechanical (at 600 cpm) 108 (1 Form C 2 coil latching type:107) life (min. Electrical 2 A 30 V DC 5 x 105 operations) resistive * Gold capped silver-palladium contact also available for 2 Form C 107 operations at 0.1 A 50 V DC resistive 20 cpm at rated load 50 cps at low level load Min. 1,000 M (at 500 V DC) (DS1-S type) (Other types) 500 Vrms 1,000 Vrms -- 1,000 Vrms 1,000 Vrms 1,500 Vrms 1,500 V (Except DS1-S type) Approx. 10 ms (Approx. 3 ms) Approx. 5 ms (Approx. 2 ms) Approx. 3 ms Approx. 3 ms Max. 65C 1C, 2C: Min. 490 m/s2 {50 G} 4C: Min. 294 m/s2 {30 G} Min. 980 m/s2 {100 G} 196 m/s2 {20 G}, 10 to 55 Hz at double amplitude of 3.3 mm 294 m/s2 {30 G}, 10 to 55 Hz at double amplitude of 5 mm -40C to +70C -40F to +158F 5 to 85% R.H. Approx. 3.2 g .11 oz Approx. 4 g .14 oz Approx. 7 g .25 oz Coil (polarized) (at 25C 77F) Single side stable "M" 1 coil type latching Minimum operating power Approx. 200 mW Nominal operating power Approx. 400 mW Minimum set and reset power Approx. 90 mW Nominal set and reset power Approx. 180 mW Minimum set and reset power Approx. 180 mW 2 coil latching Nominal set and reset power Approx. 360 mW Single Minimum operating power Approx. 100 mW (128 mW)* side Approx. 200 mW stable Nominal operating power Minimum set and reset power Approx. 45 mW (58 mW)* "S" 1 coil type latching Nominal set and reset power Approx. 90 mW Minimum set and reset power Approx. 90 mW (115 mW)* 2 coil latching Nominal set and reset power Approx. 180 mW * For 1 Form C high sensitive types. Ambient temp. Humidity 1 Form C 2 Form C 4 Form C Unit weight Remarks FCC (Federal Communication Commission) requests following standard as Breakdown Voltage specification. *1 Measurement at same location as "Initial breakdown voltage" section *2 Detection current: 10mA *3 Excluding contact bounce time *4 Half-wave pulse of sine wave: 11ms, detection time: 10s *5 Half-wave pulse of sine wave: 6ms *6 Detection time: 10s *7 Refer to 5. Conditions for operation, transport and storage mentioned in *7 AMBIENT ENVIRONMENT (Page 49) 1500V 750V 10 s 160 s 113 DS TYPICAL APPLICATIONS * * * * * Telecommunication equipment Office equipment Computer peripherals Security equipment Measuring instrumentation ORDERING INFORMATION Ex DS Contact arrangement 1: 1 Form C 2: 2 Form C 4: 4 Form C 2 E M L2 DC 48 V R * Classification of type E: Amber sealed type Sensitivity M: 400 mW nominal operating power S: 200 mW nominal operating power Operating function Nil: Single side stable L: 1 coil latching L2: 2 coil latching Coil voltage DC 1.5, 3, 5, 6, 9, 12, 24, 48 V *Reverse polarity types available (add suffix-R). Standard packing: Carton: 50 pcs.; Case: 500 pc TYPES at 20C 68F Part No. 2 Form C DS2E-M-DC1.5V DS2E-M-DC3V DS2E-M-DC5V DS2E-M-DC6V DS2E-M-DC9V DS2E-M-DC12V DS2E-M-DC24V DS2E-M-DC48V DS2E-S-DC1.5V DS2E-S-DC3V DS2E-S-DC5V DS2E-S-DC6V DS2E-S-DC9V DS2E-S-DC12V DS2E-S-DC24V DS2E-S-DC48V Part No. 2 Form C DS2E-ML-DC1.5V DS2E-ML-DC3V DS2E-ML-DC5V DS2E-ML-DC6V DS2E-ML-DC9V DS2E-ML-DC12V DS2E-ML-DC24V DS2E-ML-DC48V DS2E-SL-DC1.5V DS2E-SL-DC3V DS2E-SL-DC5V DS2E-SL-DC6V DS2E-SL-DC9V DS2E-SL-DC12V DS2E-SL-DC24V DS2E-SL-DC48V Single side stable Nominal voltage, V DC www..com 1.5 M (400 mW) type 3.0 5.0 6.0 9.0 12.00 24.00 48.00 1.5 3.0 5.0 6.0 9.0 12.00 24.00 48.00 1 Form C DS1E-M-DC1.5V DS1E-M-DC3V DS1E-M-DC5V DS1E-M-DC6V DS1E-M-DC9V DS1E-M-DC12V DS1E-M-DC24V DS1E-M-DC48V DS1E-S-DC1.5V DS1E-S-DC3V DS1E-S-DC5V DS1E-S-DC6V DS1E-S-DC9V DS1E-S-DC12V DS1E-S-DC24V DS1E-S-DC48V 4 Form C DS4E-M-DC1.5V DS4E-M-DC3V DS4E-M-DC5V DS4E-M-DC6V DS4E-M-DC9V DS4E-M-DC12V DS4E-M-DC24V DS4E-M-DC48V DS4E-S-DC1.5V DS4E-S-DC3V DS4E-S-DC5V DS4E-S-DC6V DS4E-S-DC9V DS4E-S-DC12V DS4E-S-DC24V DS4E-S-DC48V S (200 mW) type 1 coil latching Nominal voltage, V DC 1.5 3.0 5.0 6.0 9.0 12.00 24.00 48.00 1.5 3.0 5.0 6.0 9.0 12.00 24.00 48.00 1 Form C DS1E-ML-DC1.5V DS1E-ML-DC3V DS1E-ML-DC5V DS1E-ML-DC6V DS1E-ML-DC9V DS1E-ML-DC12V DS1E-ML-DC24V DS1E-ML-DC48V DS1E-SL-DC1.5V DS1E-SL-DC3V DS1E-SL-DC5V DS1E-SL-DC6V DS1E-SL-DC9V DS1E-SL-DC12V DS1E-SL-DC24V DS1E-SL-DC48V 4 Form C DS4E-ML-DC1.5V DS4E-ML-DC3V DS4E-ML-DC5V DS4E-ML-DC6V DS4E-ML-DC9V DS4E-ML-DC12V DS4E-ML-DC24V DS4E-ML-DC48V DS4E-SL-DC1.5V DS4E-SL-DC3V DS4E-SL-DC5V DS4E-SL-DC6V DS4E-SL-DC9V DS4E-SL-DC12V DS4E-SL-DC24V DS4E-SL-DC48V M (180 mW) type S (90 mW) type 2 coil latching Part No. 1 Form C 2 Form C 1.5 DS2E-ML2-DC1.5V DS1E-ML2-DC1.5V 3.0 DS2E-ML2-DC3V DS1E-ML2-DC3V 5.0 DS2E-ML2-DC5V DS1E-ML2-DC5V M 6.0 DS2E-ML2-DC6V DS1E-ML2-DC6V (360 mW) 9.0 DS2E-ML2-DC9V DS1E-ML2-DC9V type 12.00 DS2E-ML2-DC12V DS1E-ML2-DC12V 24.00 DS2E-ML2-DC24V DS1E-ML2-DC24V 48.00 DS2E-ML2-DC48V DS1E-ML2-DC48V 1.5 DS2E-SL2-DC1.5V DS1E-SL2-DC1.5V 3.0 DS2E-SL2-DC3V DS1E-SL2-DC3V 5.0 DS2E-SL2-DC5V DS1E-SL2-DC5V S 6.0 DS2E-SL2-DC6V DS1E-SL2-DC6V (180 mW) 9.0 DS2E-SL2-DC9V DS1E-SL2-DC9V type 12.00 DS2E-SL2-DC12V DS1E-SL2-DC12V 24.00 DS2E-SL2-DC24V DS1E-SL2-DC24V 48.00 DS2E-SL2-DC48V DS1E-SL2-DC48V Notes:1. Reverse polarity types available (add suffix-R). 2. Standard packing: carton: 50 pcs.; case: 500 pcs. Nominal voltage, V DC 4 Form C DS4E-ML2-DC1.5V DS4E-ML2-DC3V DS4E-ML2-DC5V DS4E-ML2-DC6V DS4E-ML2-DC9V DS4E-ML2-DC12V DS4E-ML2-DC24V DS4E-ML2-DC48V DS4E-SL2-DC1.5V DS4E-SL2-DC3V DS4E-SL2-DC5V DS4E-SL2-DC6V DS4E-SL2-DC9V DS4E-SL2-DC12V DS4E-SL2-DC24V DS4E-SL2-DC48V 114 DS COIL DATA Single side stable Nominal voltage, V DC 1.5 3.0 5.0 6.0 9.0 12.00 24.00 48.00 1.5 3.0 5.0 6.0 9.0 12.00 24.00 48.00 Pick-up voltage, V DC (max.) 1 Form C 2, 4 Form C 1.05 1.05 2.10 2.10 3.50 3.50 4.20 4.20 6.30 6.30 8.40 8.40 16.800 16.800 33.600 33.600 1.20 1.05 2.40 2.10 4.00 3.50 4.80 4.20 7.20 6.30 9.60 8.40 19.200 16.800 38.600 33.600 Drop-out voltage, V DC (min.) 0.15 0.30 0.50 0.60 0.90 1.20 2.40 4.80 0.15 0.30 0.50 0.60 0.90 1.20 2.40 4.80 Coil resistance, (10%) 00.005.63 00.22.5 00.62.5 090 203 360 14400 57600 00011.3 045 125 180 405 720 28800 1152000 Maximum allowable voltage, V DC (at 50C 122F) 1 Form C 2, 4 Form C 01.8 02.25 03.6 4.5 6 7.5 07.2 9.0 10.8 13.50 14.4 18.00 28.8 36.00 57.6 72.00 02.4 3.0 04.8 6.0 08.0 10.00 09.6 12.00 14.4 18.00 19.2 24.00 38.4 48.00 76.8 96.00 Maximum allowable voltage, V DC (at 50C 122F) 2, 4 Form C 1 Form C 01.8 02.25 03.6 4.5 6 7.5 07.2 9.0 10.8 13.50 14.4 18.00 28.8 36.00 57.6 72.00 02.4 3.0 04.8 6.0 08.0 10.00 09.6 12.00 14.4 18.00 19.2 24.00 38.4 48.00 76.8 96.00 Maximum allowable voltage, V DC (at 50C 122F) 2, 4 Form C 1 Form C 01.8 02.25 03.6 4.5 6 7.5 07.2 9.0 10.8 13.50 14.4 18.00 28.8 36.00 57.6 72.00 02.4 3.0 04.8 6.0 08.0 10.00 09.6 12.00 14.4 18.00 19.2 24.00 38.4 48.00 76.8 96.00 at 20C 68F "M" type "S" www..com type 1 coil latching Nominal voltage, V DC 1.5 3.0 5.0 6.0 9.0 12.00 24.00 48.00 1.5 3.0 5.0 6.0 9.0 12.00 24.00 48.00 Set/Reset, V DC (max.) 1 Form C 1.05 2.10 3.50 4.20 6.30 8.40 16.800 33.600 1.20 2.40 4.00 4.80 7.20 9.60 19.200 38.400 2, 4 Form C 1.05 2.10 3.50 4.20 6.30 8.40 16.800 33.600 1.05 2.10 3.50 4.20 6.30 8.40 16.800 33.600 Coil resistance, (10%) 00.12.5 050 139 200 450 800 32000 1280000 025 100 278 400 900 16000 64000 2560000 Coil resistance, (10%) Coil I Coil II 0000.6.25 025 00.69.4 100 225 400 16000 64000 00.12.5 050 139 200 450 800 32000 1280000 "M" type "S" type 2 coil latching Nominal voltage, V DC 1.5 3.0 5.0 6.0 9.0 12.00 24.00 48.00 1.5 3.0 5.0 6.0 9.0 12.00 24.00 48.00 Set/Reset, V DC (max.) 1 Form C 1.05 2.10 3.50 4.20 6.30 8.40 16.800 33.600 1.20 2.40 4.00 4.80 7.20 9.60 19.200 38.400 2, 4 Form C 1.05 2.10 3.50 4.20 6.30 8.40 16.800 33.600 1.05 2.10 3.50 4.20 6.30 8.40 16.800 33.600 "M" type "S" type 115 DS DIMENSIONS 1 Form C Single side stable & 1 coil latching 15 .590 9.3 9.8 .366 .386 3.5 .138 5.08 .200 7.62 .300 0.6 .024 5.08 .200 7.62 .300 0.6 .024 1 + 7.62 .300 6 - 0.3 .012 PC board pattern (Copper-side view) 2 coil latching 15 .590 9.9 .390 mm inch 2 coil latching 6-0.9 dia 6-.035 dia 2.54 .100 2.54 .100 Single side stable & 1 coil latching 5-0.9 dia 5-.035 dia 2.54 .100 7.62 .300 2.54 .100 7.62 .300 General tolerance: 0.3 .012 1 coil latching 1 - 6 + Tolerance: 0.1 .004 2 coil latching 1 + 3 - 6 + Schematic (Bottom view) www..com Single side stable Deenergized condition SET RST * A polarity bar showing the relay direction can replace the schematic. N.O. N.C. 12 10 COM 7 SET RST COM 12 10 7 Diagram shows the "reset" position when terminals 1 and 6 are energized. Energize with reverse polarity to transfer contacts. SET RST COM 12 10 7 Diagram shows the "reset" position when terminals 3 and 6 are energized. Energize terminals 1 and 3 to transfer contacts. 2 Form C Single side stable & 1 coil latching 20 .787 9.3 9.8 .366 .386 3.5 .138 5.08 5.08 .200 .200 7.62 .300 0.3 0.6 0.6 .012 .024 5.08 5.08 5.08 .024 7.62 .300 .200 .200 .200 2.54 .100 9 11 13 16 Single N.O. N.C. COM - PC board pattern (Copper-side view) 2 coil latching 20 .787 9.9 .390 mm inch 2 coil latching 10-0.9 dia 10-.035 dia 2.54 .100 Single side stable & 1 coil latching 8-0.9 dia 8-.035 dia 2.54 .100 7.62 .300 2.54 .100 2.54 .100 7.62 .300 matching 16 pin IC socket General tolerance: 0.3 .012 1 coil latching 9 11 13 SET RST COM 16 + Tolerance: 0.1 .004 2 coil latching 9 11 13 15 16 SET RST COM - - Schematic (Bottom view) side stable Deenergized condition Reset N.O. N.C. COM 8 6 4 + 1 SET RST COM - 8 6 4 1 Diagram shows the "reset" position when terminals 1 and 16 are energized. Energize with reverse polarity to transfer contacts. * A polarity bar showing the relay direction can replace the schematic. SET RST COM + + 8 6 4 21 Diagram shows the "reset" position when terminals 2 and 15 are energized. Energize terminals 1 and 16 to transfer contacts. 4 Form C Single side stable & 1 coil latching 35.24 1.387 9.3 9.8 .366 .386 2 coil latching 35.24 1.387 9.9 .390 mm inch 3.5 .138 5.08 5.08 .200 .200 7.62 .300 5.08 5.08 5.08 .200 .200 .200 0.6 .024 5.08 5.08 5.08 5.08 5.08 5.08 .200 .200 .200 2.54 .200 .200 .200 .100 0.6 .024 7.62 .300 0.3 .012 General tolerance: 0.3 .012 Single side stable & 1 coil latching 14-0.9 dia 14-.035 dia 2.54 .100 2.54 .100 2 coil latching 16-0.9 dia 16-.035 dia 2.54 .100 7.62 .300 2.54 .100 PC board pattern (Copper-side view) 7.62 .300 2.54 x 2 2.54 x 2 2.54 x 3 2.54 x 2 2.54 x 2 2.54 x 2 .100 x 2 .100 x 2 .100 x 3 .100 x 2 .100 x 2 .100 x 2 2.54 x 2 2.54 x 2 2.54 x 2 2.54 2.54 x 2 2.54 x 2 2.54 x 2 .100 x 2 .100 x 2 .100 x 2 .100 .100 x 2 .100 x 2 .100 x 2 Tolerance: 0.1 .004 Single side stable 9 11 13 16 14 12 10 N.O. N.C. COM - COM N.C. N.O. 1 coil latching 9 11 13 16 14 12 10 SET RST COM + COM RST SET 2 coil latching 9 11 13 1516 14 12 10 SET RST COM - - COM RST SET Reset Set Schematic (Bottom view) Deenergized condition N.O. N.C. COM + COM N.C. N.O. 7 864 135 * A polarity bar showing the relay direction can replace the schematic. SET RST COM - COM RST SET 7 8 64 135 Diagram shows the "reset" position when terminals 1 and 16 are energized. Energize with reverse polarity to transfer contacts. SET RST COM + + COM RST SET 7 8 6 4 21 3 5 Diagram shows the "reset" position when terminals 2 and 15 are energized. Energize terminals 1 and 16 to transfer contacts. 116 Set DS REFERENCE DATA 1. Maximum switching capacity 1,000V 3. Contact reliability for AC loads 2. Life curve (Resistive load) 1,000 No. of operations, x104 Sample: DS2E-M-DC24V 10 pcs. Cycle rate: 20 cpm. Detection level: 200 mW F(t), % 99.9 99.0 95.0 70.0 50.0 30.0 10.0 5.0 1A 250 125V VA A CC Contact voltage 10V 10 0.5 0.2 10mV 10A 0.1 100mA 1A Switching current 0 1 2 Switching current, A 0 0.5 A 2.0 1.0 0.3A 125 V DC www..com 10 100 No. of operations, x104 250 VA C 0.5A 125V AC Weibull probability data 1,000 3A 2A 0A Reset coil Set coil (1) (2) (3) OFF OFF R ON 100V 100 30 V DC 4-(1). Coil termperature rise (2 Form C single side stable type) Point measured: Inside the coil Ambient temperature: 18 to 19C 64 to 66F 60 Temperature rise, C 50 40 30 20 10 0 3A 4-(2). Coil tempeature rise (4 Form C single side stable type) Point measured: Inside the coil Ambient temperature: 17 to 18C 63 to 64F 60 Temperature rise, C 4-(3). Coil temperature rise (2 Form C 2 coil latching type) Point measured: Inside the coil Ambient temperature: 20 to 21C 68 to 70F 60 Temperature rise, C 50 40 30 20 10 0 2A 0A 50 40 30 0A 20 10 0 3A 2A 100 110 Coil applied voltage, %V 100 110 Coil applied voltage, %V 100 110 Coil applied voltage, %V 4-(4). Coil temperature rise (4 Form C 2 coil latching type) Point measured: Inside the coil Ambient temperature: 20C 68F 60 Temperature rise, C 50 40 0A 30 20 10 0 Reset coil Set coil 3A 2A 5. Operate and release time characteristics (2 Form C single side stable type) Test condition: Without diode connected to coil in parallel 4 Operate and release time, ms 6-(1). Influence of adjuacent mounting (1 Form C) Rate of change, % 10 0 -10 Pick-up voltage R ON 3 Operate time (mean) R R Rete of change, % 2 Release time (mean) 1 10 0 -10 Drop-out voltage OFF OFF R ON R ON R R 100 110 Coil applied voltage, %V 0 80 100 120 Coil applied voltage, % 5 10 .197 .394 Inter-relay distance R, mm inch 6-(2). Influence of adjacent mounting (2 Form C) Rate of change, % Pick-up voltage (1) (2) (3) OFF OFF 6-(3). Influence of adjacent mounting (4 Form C) 80 Rate of change, % 60 40 20 R R (1) (2) (3) OFF OFF 80 Rate of change, % 60 40 20 Drop-out voltage (1) (2) (3) OFF OFF 10 0 -10 Pick-up voltage R ON R ON R ON R ON R ON R ON R R R R 0 OFF OFF 0 OFF OFF Rete of change, % 10 0 -10 Drop-out voltage OFF OFF -20 -40 R ON R ON -20 -40 -60 R ON R ON R ON R ON -60 R R R R -80 10 20 .394 .787 Inter-relay distance R, mm inch R R -80 10 20 .394 .787 Inter-relay distance R, mm inch 5 10 .197 .394 Inter-relay distance R, mm inch 2000 Matsushita Electric Works Group Europe For Cautions for Use, see Relay Technical Information. |
Price & Availability of LR26550 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |